Pump Sales
Welcome
Registered Manufacturer
Member of ISPE, AFE.
Est. Since 1967
Submersible Sump Pump
To confirm information about any of our products please contact a specialist by calling or emailing us directly.
Telephone: 978-657-5189
Email: office@twtic.com
PDF Brochures
Highlights
- Motors are fully submersible
- Close-coupled design for perfect alignment
- Easy installation and removal
- Automatic operation of single phase units
- Ideal for elevator pits
Features
MOTOR: Fully submersible motor in cast iron housing with stainless steel shaft. Units operate at 1750 RPM. Single phase motors are available for 115V or 230V operation. (115V only for 1/4 HP units) and have built-in overload protection. Three phase motors are available for 1/3 HP and 1/2 HP units, rated for 230V operation and should be provided with magnetic starters.
PUMP: Close-coupled design with impeller locked firmly to the motor shaft. All units have cast iron pump volutes. Impellers are plastic for 1/4 HP and 1/3 HP units and cast iron for 1/2 HP units. Some units are available in all-bronze construction.
POWER CORD: Fully sealed waterproof power cord is furnished on all single phase units. The standard cord length is 10-ft. for 1/4 HP units and 20-ft. for 1/3 HP and 1/2 HP units. Longer power cords are available if required.
FLOAT SWITCH: Automatic operation of the single phase pumps is provided by an integral submersible float switch. For all three phase units and for single phase units where non-standard float travel is required, the float switch is furnished in a separate submersible housing for mounting on the discharge pipe of the pump.
APPLICATION: Type P submersible sump pumps are ideally suited for a variety of applications including elevator pits, home and industrial building sumps, loading dock areas and effluent pits. Standard-fitted construction is suitable for most applications.
ACCESSORIES: A variety of accessories are available for Type P submersible sump pumps including magnetic starters, control panels, long-travel float switches, sump basins (cast iron or steel or fiberglass), pit covers and grouting frames for concrete pits and high water alarms. Type P pumps can also be controlled by the Federal Type SBS Submers-a-bulb controllers.
Performance
Performance Table
Model | G.P.M | Disch. Head (Ft.) | Disch. Size (ins.) | Motor HP |
1-1/2P-1/4-4 | 10 | 19 | 1-.5 | 0.25 |
1-1/2P-1/3-4 | 10 | 22 | 1-.5 | 0.33 |
2P-1/2-4 | 10 | 25 | 2 | 0.5 |
1-1/2P-1/4-4 | 15 | 18 | 1-.5 | 0.25 |
1-1/2P-1/3-4 | 15 | 21 | 1-.5 | 0.33 |
2P-1/2-4 | 15 | 24 | 2 | 0.5 |
1-1/2P-1/4-4 | 20 | 17 | 1-.5 | 0.25 |
1-1/2P-1/3-4 | 20 | 20 | 1-.5 | 0.33 |
2P-1/2-4 | 20 | 23 | 2 | 0.5 |
1-1/2P-1/4-4 | 30 | 13 | 1-.5 | 0.25 |
1-1/2P-1/3-4 | 30 | 18 | 1-.5 | 0.33 |
2P-1/2-4 | 30 | 22 | 2 | 0.5 |
1-1/2P-1/4-4 | 40 | 8 | 1-.5 | 0.25 |
1-1/2P-1/3-4 | 40 | 15 | 1-.5 | 0.33 |
2P-1/2-4 | 40 | 21 | 2 | 0.5 |
1-1/2P-1/3-4 | 50 | 12 | 1-.5 | 0.33 |
2P-1/2-4 | 50 | 20 | 2 | 0.5 |
1-1/2P-1/3-4 | 60 | 10 | 1-.5 | 0.33 |
2P-1/2-4 | 60 | 19 | 2 | 0.5 |
2P-1/2-4 | 70 | 18 | 2 | 0.5 |
2P-1/2-4 | 80 | 16 | 2 | 0.5 |
2P-1/2-4 | 90 | 15 | 2 | 0.5 |
2P-1/2-4 | 100 | 13 | 2 | 0.5 |
Dimensions
Dimensions Table
Model | Min Sump Dia. (inches) | Overall Pump HGT. (inches) | Disch. Size (inches) | Cord length (feet) | Max. Amb. Temp. | Wgt. (pounds) | Std. Float Travel (inches) |
1-1/2P-1/4-4 | 12 | 10 | 1.5 | 10 | 104 degreesF | 40 | 9 |
1-1/2P-1/3-4 | 12 | 12 | 1.5 | 20 | 130 degrees F | 40 | 9 |
2P-1/2-4 | 15 | 18 | 2 | 20 | 130 degrees F | 60 | 9 |